Black Ribbed
Ideal for boat floors, gunnels, launches, boat decks, steps, wet areas, stand up paddle boards, surf boards, jet skis.
– Made from closed cell waterproof EVA Foam
– Self Adhesive backing
– Light Weight
– Soft under foot
– Non-slip
– Won’t absorb water
Please note, due to the manufacturing process, colours may vary between batches.
Pricing
5mm thick x 1.2m wide x 2.4m long = $176.00 plus gst
Dimensions
Sheet Size:Â 5mm thick x 1.2m x 2.4m
Rib Size:Â 10mm wide with 5mm gap between the ribs
The ribs run down the 2.4m length of the sheet
Installation Instructions
Marine Deck Tread Application:
Do NOT install decking in temperatures below 15°C or above 25°C
– Please ensure surface is cleaned with detergent and warm water, then rinsed clean.
– When dry, wipe surface with an alcohol-based cleaner such as wax & grease remover or Iso.
– Press matting into place with heavy, even pressure to ensure a firm bond.
– Allow 24hrs for the Pressure-Sensitive Adhesive (PSA) tape to cure.
Care Instructions
Storing the Marine Deck Matting:
– The Marine Deck Matting sheets are often rolled for shipping around NZ. This is fine for short term transporting; however the sheets need to be kept flat if storing long term.
– Please unroll your marine deck matting as soon as received and lay the sheets to flatten out.
– Please keep stored in a cool, dry place and out of direct sunlight.
Cleaning the Marine Deck Matting:
– To clean the Marine Deck Matting, use detergent with water, and scrub with a medium bristled brush.
– Do NOT use a bleach-based detergent as this will strip the colour from the foam.
– Clean spills immediately to reduce possible staining. This includes food, fish blood, bait etc.
Black Ribbed
$176.00
Note: price displayed is per item
Related Products
Have Questions?
